Wireless Microphone

Using the Wireless Microphone (Shure)

        

 Using the Wireless Microphone (Shure)

Replace battery if Amber or Red LED Battery Indicator light is illuminated.

Press down on tab and slide battery door to open.  Insert battery matching polarity as indicated above.  Door will not close if inserted incorrectly.

Using the Wireless Microphone (Lectrosonic)

        

Using the Wireless Microphone (Lectrosonic)

  1. Turn the microphone using the on/off switch.  It will take a few seconds before the microphone is active during which the LEDs will flash several times.
  2. If the battery indicator is amber, red, or off after turning the microphone on replace the battery.
  3. To replace the battery push the door on the bottom of the microphone away from the case and swing it open.
  4. Insert the battery matching the polarity as indicated inside the beltpack.  Door will not fully close if the battery is inserted incorrectly.

Published on  and maintained in Cascade CMS.